There are thousands of people who love Rolex exact replica watches. You must also know that Rolex has a saying about “antique labor”. If I meet antique labor that excites me and can bear it, I will not hesitate. So today, I’m sharing a detailed list of new skills to recognize the “antique labor” watch fans who must get the gist!

Ten things we need to do to buy vintage Rolex

1. Judge the authenticity of the disk

The disk surface is proper, only to continue to check the other items necessary, this is the premise, and there is no trick to this step, only meticulous inspection. Carefully observe the disc surface of the crown logo and printing words, compared with the relevant model, and through the authoritative books or pictures comparison; For example, should the crown be stereoscopic or printed? Is the crown-shaped correctly? Is the font of the line print consistent with the reference target? Is there any rewriting or face-swapping? Once this step is done, move on to the other items.

2. Determine the year of the disk

For antique workers, whether each part is the same edition directly affects its overall value. And the disc year period usually checks its luminous material can be. Different periods of bright material are qualitatively different, such as a laser used to the early 60 s tritium in use until 1998, Luminova used in early 1998-1999, and the back are the Super Luminova and Chromalight.

How to judge? Through the six-point time mark below the plate, we can distinguish. For example, early watches SWISS represent radium, T Swiss T or T Swiss T<25 embodies tritium, late exact replica watches SWISS represent Luminova, in the future is now newly installed Swiss Made.

3. Evaluate the status of the disk

If the first two items are okay, you can evaluate the status of the disk. At this stage, we can learn some exciting nouns. For example, if the dial is faded to an even brown color, the cognoscenti would say: tropical dial; And the disk surface has a uniform crack, called spider surface (spider). While only some are keen on such plates, they have their fair share of fans. The critical point of evaluation is whether the disk surface has hard damage and severe deterioration, such as stains, scratches, time labels, etc., and whether the “service dial” recognition degree of the labor service surface is low.

4. Check the table between the ears

On the top of the watch case, the table between the ear of 12 points, we can find the watch models, usually 4 to 6 digits. In Tanyi’s case, the model could be 6610 or 1016, or a five-digit 14270, then a six-digit 114270, and the current model 214270. There are also calendarless water ghosts, such as 5513/5512, to the current 114,060.

Once the model is determined, you have a relatively accurate reference target. Again, we can find the watch’s serial number between the six-point ear. From the serial number, we can roughly determine the year of production of Rolex before 2010 (after 2010 is garbled). A serial number beginning with 44 is usually a service case.

5. Check the bottom cover and movement

Usually, the lettering inside the bottom cover (if not polished off) can confirm our judgment of the previous steps. Note that the model and year shown on the bottom surface may differ slightly from the information obtained in the earlier stages as long as the model corresponding to the structure of the watch is the same. Or take the water ghost as an example, 5513 May has a 5512 lettering back cover, and the only difference between these two exact replica watches is only the latter for the Observatory certification.

In addition, some parts need to be assembled into a table immediately after production, and usually, the one-year error is understandable. Of course, opening the bottom cover can be one end of the movement; combined with the reference materials we searched, we can judge the plate path and lettering of the action.

We can also judge whether the table is open for special tools from the back cover and check whether there are traces of a violent available body. In addition to the apparent damage, such as scratches and scratches, the violent cover opening may cause deformation of the rear surface, affecting the watch’s waterproof performance. Therefore, you need to be careful when checking.

6. Check the crown

The crown, another critical component for water resistance, also needs extra scrutiny. First, check the authenticity; the height should have the word “brevet” or a double or triple lock logo. In the case of antique steel, the double lock is a horizontal bar, and the triple lock is three equal dots.

Second, you need to check whether the double-lock crown has been replaced with a triple-lock crown. Although the latter water resistance is more robust, it does affect the whole table coordination; And the latter is more significant and doesn’t match the crown shoulder of the earlier Water Ghost. Of course, we consider whether to accept according to the collection or daily needs.

7. Check the strap

For the identification of antique Rolex, a strap is a good clue. From close to the ear of the first section on the watch chain, we can find the chain type and query the production s. For example, the 7206 is a riveted belt with a link width of 20mm from the 50s and 60s, while the 7205 represents a model with a link width of 19mm.

In addition, the end chain joint (arc mouth) is also engraved with a model number, which should be appropriate for the specific watch. For example, in antique Dittona, all end chains end with 71 digits. If you are still looking for one, you can renegotiate the price.

8. Check the attachment

In the camera field, we often say: the case is complete. And in the category of antique exact replica watches, love said: extensive set. A large group is undoubtedly more collectible and reliable than a single watch. But then, is that foolproof? There’s a lot of access to antique boxes and blank documents. It’s impossible to prevent, but we can at least focus on the details we can.

For example, an antique claw with a modern green case number does not correspond to the document. Although straightforward, people may ignore these details in exciting moments. In addition, if, in addition to the warranty documents, there are other supporting documents, such as manuals, product brochures, shopping invoices, official maintenance, etc., it will be more convincing.

9. Evaluate the look

10. Get to know the seller

Reputable merchants, and authoritative collectors, both of which may be the most reliable antique labor sellers. We can learn more or less about the creditworthiness of the table from various forums and previous trading records, or we can consult the table directly and then make a judgment. The experience of dealing with a seller is essential. Their answers and pictures are usually a good reference and judgment basis. If something is reliable and reasonable, sellers are always willing to provide details. But it is also essential for buyers to learn to respect each other. After all, for a good business, there is no shortage of buyers.

Tips: To buy an antique Rolex, first pay attention to the plate and then obtain information from the parts; careful viewing, comparison, judgment, and careful trading, an antique watch picky a little, is a good thing. Thoserested in antique Rolex will be delighted at an early date.

People who love the table must also have doubts about why mechanical watches need daily maintenance; some say that mechanical watches do not require maintenance; most mechanical timepieces are to repair; in fact, they need clarification on the concept of maintenance and warranty; mechanical watches need maintenance. Xiaobian today to talk with you about why mechanical buying replica watch maintenance.

The mechanical buying replica watch’s waterproof rubber ring will be aging

For the value of the mechanical watch, waterproofing is essential. Most imitation watches are waterproof, such as 30 m and 50 m, 100 m, and so on. But some are not waterproof. For a waterproof watch, first to correctly understand the meaning of waterproof depth, such as 30 meters and 50 meters waterproof is just life waterproof, that is to say, you wash your face and other splashing water is no problem. There are some, such as diving watches, waterproof, high watches that can swim and dive, but also pay attention: There are some waterproof watches such as diving watches, can swim, diving, etc., but also pay attention to some high waterproof watches, such as diving watches can swimming, diving, etc., but also should note: not wearing a sauna and a hot bath, because mat glue after cold, hot air into the sealing bag, can’t come out, cause the fog is not handled in time, caused by corrosion and rust. It can be problematic over time, even if it’s OK once or twice.

The watch is waterproof mainly by several small rubber rings, a long rubber ring will be aging, and there is a crack after losing elasticity, which can lead to water, and air inlet, so be replaced periodically; sealing the rubber ring can ensure that watch is waterproof. It is why some people just bought a buying replica watch waterproof is very good, but suddenly one day, the reason for the water. Why do we have to change them regularly? Regular replacement is more to play a preventive role; waiting until after the watch rubber ring ages is not good, but how to judge aging is a problem; one can only wait after the watch water changes.

The oil will dry up

Like a mechanical instrument used for a long time will not be flexible, so is the watch because an automatic watch can be seen as a small mechanical instrument. Traditional mechanical watches are mainly composed of four parts; the first part is the original system, the simple point is understood as we often say spring part, the second part is the transmission, the main gear, according to a specific ratio, is used for measuring time, the third part is the escapement speed regulation system, this is the heart of watches, balance wheel, and hairspring, escapement fork, These parts of the escapement wheel are very crucial, determined mainly by the accuracy of the watch. The fourth part is the pointer indicating the system. If the above is the mobile part, this part is connected to the buying replica watch, and people need to use this part to wind or adjust the time.

The operation of the whole watch the need for all systems to cooperate; how to make them smooth? Here is a demand for lubricating oil, but for a long time, the amount of oil will be reduced or dry deterioration; at this time, give the watch new oil. And if you do not provide the watch oil in time, once the oil is dry, the power system is in dry wear, and a few years down, the life of the table is too. It must be noted that mechanical watches in oil had better choose a regular maintenance center because the actual place where the formal will be strictly according to the need for the watch in oil.

Buying replica watch the appearance of maintenance

As we all know, in the second-hand market, the quality of the product is essential. And even if not in the second-hand market, the appearance of the maintenance must be addressed, especially some watches using K gold, K platinum, advanced animal skin materials, and other materials. And even if it is not in the second-hand market, the appearance maintenance must be addressed, especially in some watches with K gold, K platinum, advanced animal leather, and other materials. It should be perfect to understand, especially since some beautiful women should be more or less to their gold rings or earrings and additional jewelry cleaning; the watch is the same truth.

Leather watchband, not to mention sweat corrosion, will make the belt premature harden and crack; regular maintenance should avoid sweating and rainy period wearing a belt table. If the watch is made of a steel shell belt, often polished renovation, more can reflect its value. Because the famous brand mechanical watch is worth a lot of money, belongs to the valuables, can not because it is not good looking old doesn’t want to. Even if it doesn’t matter to you, a poor-looking watch will never look good on you. Some people may feel at home cleaning their watch is OK, but it is best to carry out special appearance maintenance within a specific time.

Mechanical table maintenance mainly extends its service life and timely discovery of problems, and we feel about the same annual physical examination. In short, we should pay attention to the mechanical buying replica watch if it has yet to be maintained; one day, it will be wrong, this is certain.

[Guide] As the saying goes, a good quality replica watch is inseparable from excellent movement. Movement is the heart of the watch. Rolex’s travel time accuracy comes from a perfect idea of the movement. The structure of the speed-regulating mechanism is reasonable. A few minor details have made Rolex reach the certification of the super observatory. The daily error of – 2/+2 seconds is quite tricky. A good watch is not accurate for a moment, but valid for a continuation; I think the reasons why Rolex is so precise and stable are the following aspects: Trimmer screw, no clamp balance wheel, 4hz frequency movement, Baoji hairspring, straddle type cycloid bridge plate, and Rolex specially made smooth oil. These details all determine the timeliness. Here are some essential points to analyze.

1) Rolex’s excellent speed-governing mechanism

Two pairs of acceptable adjustment weights

The most important thing for a quality replica watch to travel accurately and stably is the speed regulating mechanism, which includes an escapement assembly and oscillator, which shows the running speed of the replica watch, also known as the “time guard”. Rolex is well aware that any small parts in all movements are independently researched, developed, and produced by the group. Two pairs of gold weights without cardo hairspring are designed in this field. These four fine-tuning weights can adjust the speed of the pendulum wheel to achieve more accuracy. The commonly used movement is in the form of a screw knob.

Blue Parachrom hairspring

The unique blue silicon hairspring of Rolex is one of the potent symbols of Rolex. Such hairspring greatly enhances the diamagnetism of the quality replica watch and keeps accurate travel time under different temperatures.

2) Rolex’s idea of movement

Assumption of large protective bridge

The traditional idea of the movement is that the swing wheel is firmly under the splint and then firmly on one side of it. Rolex only uses the concept of crossing a sizeable protective bridge, which dramatically increases the stability of the speed-regulating mechanism. When the outside world influences it, it still keeps a stable travel time, which is also one of Rolex’s patents.

Cushioning device

Rolex has always adopted the KIF cushioning concept. It was not until 2005 that Rolex had the entire cushioning assembly of Paraflex, which was independently developed and obtained a patent. At a glance, we can find the strange features of this system. How many reasons were used to wrap the ruby firmly in it, like a spring, and the effect of absorbing internal impact has improved by 50%?

3) 4 Hz standard frequency

Watchers who can repair watches know that there is a vibration frequency in testing the performance of the movement. The more stable the vibration frequency, the more stable and accurate the travel time. The higher the other vibration frequencies, the more precise the travel time. However, the higher the wear and tear, the shorter the time for protection and care. Rolex found the most appropriate brand of 4hz frequency through testing, and the stable connection of this frequency delayed the watch’s accurate care cycle to five years.

4) Rolex’s Secret Recipe Smooth Oil

Mr. Baoji sighed: “Give me the perfect smooth oil in the world, and I can make the perfect watch.” The smooth oil is an essential part of small details. It is natural and accurate when you leave with good oil resistance and little friction. Therefore, I recommend that your quality replica watch friends send it back to the Rolex after-sales center for oil washing when recuperating. The strange smooth oil that Rolex applied for patent also makes the watch more accurate and abrasion resistant; in recent years, Rolex will improve the protection period of watches from 5 years to 10 years. I think it is also closely related to smooth oil (just a guess)

Tips Summary: a watch travel time accurate and comprehensive pneumatic dense ingredients is not precise to myth Rolex. Choosing a quality replica watch    needs to be examined in many ways, and natural is just one of them. More common sense watch can continue to pay attention to Xiaobian. Share your strengths and weaknesses in the comments.

Hello, everyone. Xiao Bian has met you again. Speaking of Rolex, the symbol of identity, “labor,” is always accessible. People who buy watches are pleased. The high-end is of the high class. But many people who buy Rolex, do you know how to maintain a watch replica? What should we pay attention to in daily life? Next, I will let you, “Lao people,” popularize the common sense of watches.

Watch replica Common Sense 1: Common Problems of Watch Errors:

•  Automatic mechanical watch I (men’s watch)

The instantaneous error range of travel time is the error of superior products every 24 hours is – 20 -+30 seconds; The mistake of first-class products every 24 hours is – 30 -+60 seconds; The error of qualified products is – 50 -+90 seconds every 24 hours. The continuous travel time is no less than 36 hours.

• Automatic mechanical watch replica type II (medium-sized watch)

The instantaneous error range of travel time is: the error of superior products every 24 hours is – 25 -+50 seconds; The mistake of first-class products every 24 hours is – 40 -+80 seconds; The error of qualified products is – 60 -+120 seconds every 24 hours. The continuous travel time shall be no less than 30 hours.

Xiaobian feels that if the error is almost the same every day, it can say that the quality of the table is better; you can go to the professional repair shop debugging, and you must go to the regular place debugging; the excellent table is not broken but repaired! Do you feel the same way?

Watch common sense 2: Precautions and maintenance for oil washing:

All watches need regular oil washing and maintenance. They are famous for their durability. Xiao Bian thinks the watch replica must do frequent oil washing and care because regular oil washing is essential to work in watch repair. The purpose of oil washing is to keep the watch parts clean and the machine parts lubricated to ensure the watch machine’s precision, improve the watch machine travel accuracy, and extend the watch machine’s service life.

Watch replica common sense 3: Treatment of watch water ingress:

1. Method one: Table Meng Chao inside, the bottom shell outward, reverse worn on the wrist, then it will remove the water after two hours. If the water is severe, it is best to immediately send the local professional watch shop to wipe the oil, remove the movement’s moisture, and avoid parts rust, a small series of personal experiences.
2. Method two: with granular silica gel and the watch watered into a closed container, 3-4 hours later, take out the watch replica, and the water is all gone. This method is not only simple and economical and does not have any damage or influence on the accuracy and life of the watch. The silica gel that has been absorbing water many times can be dried for several hours at 120 ° C, and the water absorption capacity is renewable and can be used repeatedly.

Here are Xiaobing’s friendship tips :(do not often take a watch, do not put the table in a humid place, also do not put around magnetic items, which will affect the watch’s accuracy. It is best to check them all so we can rest assured to avoid severe damage to the internal moving parts due to time delay. Wet weather quickly makes the watches internal oil condensation, which will produce when walking stop, slow or completely stop the phenomenon, resulting in the hardening of the waterproof ring, reducing the waterproof function. Special attention is that the sea contains salt, corrosive to the metal components, so when going out, wash the watch replica shell with fresh water to avoid corrosion.

Watch Common Sense 4: Treatment of Watch Ash：

Xiao Bian thinks that, in general, the tightness of the watch is very high, and there are two main reasons for the dust entering the watch:

• First, check whether your watch replica cover is tight, whether there are cracks due to aging or whether it is loose with the watch case (ring). If the watch is not well sealed, it will enter not only dust but also water.

• The second reason is internal wear because the dust on the dial does not come from the outside. watch replica into the ash, do not open the back cover cleaning promptly to the local professional after-sales shop for cleaning, but also timed to do waterproof test and travel time accuracy test, to ensure its regular operation.

At the same time, Xiao Bian thinks we should also pay attention to our watches and not touch chemicals daily. Please don’t take a bath with it to avoid water vapor to ensure its waterproof effect. Also, after adjusting the watch, remember to restore the head of the swiss models watch and tighten it to prevent dust from entering again.

Rolex swiss replica is not only a world-famous watch replica brand but also one of the watch brands with the highest value preservation and collection value. Many Rolex collectors are almost addicted to their collection of watches, as seen in several classic Rolex watches auctioned in famous watch auctions worldwide in recent years. So why is the collection value of Rolex swiss fake watches so high? Let the editor tell you the following.

1.The reason why Rolex swiss replica keeps its value

The stainless steel of Rolex swiss replica is more complicated than ordinary 316L stainless steel. It has a screw-in bottom cover and a multi-layer waterproof ring on the faucet, making the watch more scratch-resistant and moisture-proof. The watch is new, so its value preservation is relatively high.

2.The second reason why Rolex keeps its value

Rolex has not changed much, there are only a few classic designs, and each series of features and price divisions are very obvious, and the official price of each model will not change much, and it will not retreat due to age. Popularity is the second reason.

3.Three reasons why Rolex swiss replica keeps its value

Rolex is very fond of the precious metal 18-karat gold. White gold, rose gold, and so on, combined with a table design is a simple, not too complicated design, so is equal to price money is material, the same material of high table as design heavy and complex, so the design research and development and artificial cost will be added, and relative Rolex swiss replica because it’s pure, is a rude card table, is why people love, it’s like you go to the pawn shop to sell diamond ring, He will not estimate your cut surface or labor, only according to the carats will give you two pounds of weight to sell.

4.Four reasons why Rolex keeps its value

The gypsophila looks atmospheric, the diamonds look BLING, sparkling and endearing, and they are made of natural gold. Of course, the value preservation will be better, so people often say that Rolex is equal to cash, but cash will depreciate, and labor will preserve its value. , but whether it is gold or diamonds themselves are a kind of future, so buying a Rolex must have a profit and a loss.

5.Five reasons why Rolex swiss replica keeps its value

The movement is good; most of them are self-made. Of course, some lovers who prefer self-made movements have their charm, but his chronograph Daytona movement is modified with the direction of ZENITH’s EIPrimero, which is indisputable. However, this movement has a high vibration frequency of 36,000 times, and it is a recognized excellent movement because ZENITH also produces watches; it is also a rival, so the direction of Dittona is because it is not available. Self-made or switching to other factories has always been a topic, and it is also one of the factors for the speculation, but it is undeniable that the movement is good. Most of Rolex’s swiss fake watches are certified by the Observatory, so the price is reasonable and practical. Certainly better.

6.Six reasons why Rolex keeps its value

Do not think that Rolex is the price of those gold swiss fake watches; the real people below the glasses are water ghost and stainless steel sports watch. Stainless steel watch has a lightning pointer, green glass, ceramic ring, green water ghost, deep sea and so on, many features than DATEDATEJUST; you can not take a gold watch to sports or swimming, the scratch will be heartache, so a steel watch practicality and much higher. Hence, the price is also the most difficult to master Rolex swiss replica.

7.Seven reasons why Rolex swiss replica keeps its value

Rolex’s maintenance and service are generally recognized as good, and the price is reasonable. Also, the replacement parts are not easy to miss because there are a few changes. It is an excellent factor for the sustainable preservation of a watch. The brand is extensive and significant. Don’t be afraid to fall; unlike my antique watch, some parts are difficult to repair once missing.

8.Eight reasons why Rolex keeps its value

Of course, the disadvantage is that the price has been rising, and the cost of the new watch is astonishing. Of course, if the model keeps falling, will you still buy it?

Daily maintenance

1.Replica watch seal problem:

Most watches are waterproof, such as 30M, 50M, 100M, etc. There is also a part of the note that is not waterproof. Although noted is waterproof watch, but absolutely can not wear to take a sauna and hot bath, because cold pad shrink, hot air into the sealed bag, can not come out, resulting in fog is not timely treatment, resulting in corrosion, rust, so people can only wear the replica watch under normal circumstances. Watch waterproof mainly depends on a few small rubber rings; a long-time rubber ring will age and lose elasticity after a gap, which may lead to water, and air intake, so regularly replace the sealing rubber ring to ensure a waterproof watch.

2.Mechanical operation problem:

Famous watches are generally mechanical watches that rely on gears to operate. The watch will indicate how many diamonds are on the watch. This number of diamonds does not mean how many diamonds the watch has, but how many gear shafts are drilled on the replica watch. Artificial diamonds generally replace it because they are wear-resistant; the more drill holes on the watch, the longer its life. However, the watch’s gears cannot be processed with hard materials such as diamonds. It can only be made of steel as the axle. The smaller the buy replicas watch is, the thinner the axle is. The number of tens of thousands of revolutions per day depends entirely on the tiny amount in the drill hole. Oil to reduce wear, once the oil is dry, the axle is in dry wear, and after a few years, the life of this watch will come.

3.Replica watch appearance maintenance:

The appearance of famous watches is generally made of K gold, K platinum, and high-grade animal leather. Although the primary raw material of K gold is gold, the sweat on people’s hands is acidic and corroded by air. It will not be as beautiful when it is new for a long time, requiring frequent cleaning and polishing to keep the famous watch looking new. If it is K white gold, the silver-white layer on the outside will wear out over time, and the gold inside will be exposed, so it will not be as white as before. Not to mention the leather strap, the corrosion of sweat stains will cause the belt to harden and crack prematurely. Regular maintenance should avoid wearing a belt watch during sweaty and rainy periods. If the watch is made of steel, it is often polished and refurbished to reflect its value better.

Professional maintenance

As a luxury watch, it is recommended to carry out professional maintenance regularly in addition to daily care. Generally speaking, mechanical best replica watches need to be maintained once in 2-3 years in everyday use, cleaned, oiled, and tested and adjusted. Quartz watches must replace the battery every two years and maintain their movement.

The famous replica watch repair center technicians give the maintenance price of the watch after testing. I don’t think the price is unreasonable. The structure of many watches determines it, and the maintenance of watch movements of different brands is also other. The care of the general high-end watch movement ranges from 300-3000, and the time is generally one working day. Of course, it does not exclude that some watches need to be returned to the original factory for maintenance. The maintenance price of a quartz watch is 3-500 yuan.

Replica watch professional maintenance generally includes:

• Disassemble the watch and check all parts
• Clean and replace essential movement parts
• Oil and adjust
• Replace the crown if necessary
• Replacing the bezel connection
• Replacing the back connector
• Routine quality inspection

Recommended time for professional maintenance of individual expensive brand watches:

• Patek Philippe: Customers wash and refuel their watches every 3~5 years. The maintenance threshold for a simple, functional watch is about 6,000 yuan, and this price does not include the polishing cost of the strap, which costs more than 1,000 yuan.

• Cartier: It is recommended to go to the Cartier after-sales service center to check the watch every five years. Maintenance includes movement cleaning, waterproof rubber ring replacement, etc. Leather strap products start at 3,000 yuan, and metal strap products will be more expensive due to refurbishment, polishing, and maintenance.

• Rolex: It is recommended to carry out maintenance every four years. The maintenance fee depends on different styles. The price is about 1000~3000 yuan.

• Omega: Customers generally enjoy a 2-year warranty after buying a watch. The period of regular maintenance is usually every 4~5 years. It is recommended that customers regularly take a year or half a year to test once. But for the care of the quotation, the other insisted that people must try the price to provide the theoretical maintenance cost and the watch price into a certain proportion.

In other words, the models recommended for everyone in the near future do not clearly define an age for everyone. Many young people will wear too old-fashioned, and mature men who love simple style will be too high-profile. Today, the watch-house will recommend three fashion style Fake Breitling Watches for everyone to adapt to the needs of young and dynamic people.

Fake Breitling Watches aviation chronograph watch

Domestic public price: ¥37800
Watch diameter: 43 mm
Case thickness: 14.17 mm
Movement type: automatic machinery
Movement model: 13
Case material: steel, two-way rotation, red pointer, number and scale
Waterproof depth: 100 meters
Watch Comments: This Fake Breitling Watches is a new product presented this year, in order to commemorate the partnership with the iconic fighter manufacturer, launched three new watches. This year’s watch is based on the military green as the main color, blending the retro style with the modern aesthetic trend, very suitable for young and dynamic people to wear.

Breitling Copy series watch

Domestic public price: ¥43300
Watch diameter: 39 mm
Movement type: automatic machinery
Case material: stainless steel
Waterproof depth: 100 meters
Watch Comments: This Fake Breitling Watches is very trendy, and the physical watch is more textured. This special edition watch design draws on its prototype model, praising the deep relationship between the watch brand and the motorsport. The square dial is decorated with a blue sun-brushed blue sun-brushed matte design, and the outer edge is embossed for 60 seconds/ The minute scale and the rhodium-plated polished faceted inlay time stamp are blended with the red paint center pointer for a clearer and more intuitive time indication. The most important thing is that the start-up effect is very amazing, showing the trend of the wrist.

Breitling Imitation series watch

Domestic public price: ¥48000
Watch diameter: 42 mm
Case thickness: 12.8 mm
Movement type: automatic machinery
Case material: bronze; two-way rotating bezel, black ceramic ring engraved compass pattern
Waterproof depth: 100 meters
Watch Comments: Since it is for young people to choose, then this Fake Breitling Watches with superb value must not miss it. This watch is very novel in its design. The dial has two rotating north and south hemispheres. The northern hemisphere is at 12 o’clock, the southern hemisphere is at 6 o’clock, and the two hemispheres are marked with red in the world. In order to pay tribute to the mountain explorers. This watch has the complex world-time function developed by watchmakers: the two hemispheres rotate one turn every day in a 24-hour clock, the northern hemisphere rotates counterclockwise, and the southern hemispheres. Win the wrist with a unique world time display.

Summary:

All the above three watches have a trend-like design. In terms of performance, they also consider stability and resistance. It is the best choice for young people. The interested friends may go to the counter to try on it. Once, feel the different trends.